Advertising

SparkyLinux – full USB stick installation

 

SparkyLinux has gotten a new functionality – full installation on USB stick.
It means that you can do “normal” system installation, similar to the hard drive installation.
Key features:
– don’t need to cut your hard drive any more
– it’s possible to save your personal files, perform system upgrades, install new apps – everything on USB stick
– the USB system (for me) is still fast and light

The feature is available at coming SparkyLinux 2.1 rc “Eris” LXDE/e17 and any next one.

How to install SparkyLinux on Pen/Flash Drive?
1. You need 8GB USB stick (minimum) for “Eris” edition.
2. Read SparkyLinux 2.x hard drive installation guide.
The USB installation is in 90 % exactly the same as hard drive installation.
3. Put your attention on a few points of installation process:

§ 10. Choose USB disk (for example: /dev/sdb) instead of hard drive disk (/dev/sda).

SparkyLinux instalacja na USB

§ 11. Preper minimum two partitions on USB drive for:
– / – root dir
– swap partition
You can make one more partition for”/home” folder.

SparkyLinux instalacja na USB

§ 12. Choose partition for SWAP on USB drive (sdb2).

SparkyLinux instalacja na USB

§ 13. Choose root partition on USB drive too (sdb1).

SparkyLinux instalacja na USB

§ 18. The most important – GRUB bootloader destination – “rootmbr”.

SparkyLinux instalacja na USB

§ 20. Check all settings for new installation:
– partition “sdb1” (!) will be formatted for root file system
– GRUB will be installed to the mbr of root partition of “sdb1” (!)

After installation finished reboot your machine and start it from USB drive.

 
Back to -> FAQ main page
 

Advertising

4 thoughts on “SparkyLinux – full USB stick installation”

  1. This FAQ needs to be updated or reference to updated version. Both Sparky installers do not make reference to “rootmbr”. Grub should be installed to the root of the USB device, ie., sdb (not a partition like sdb1).

  2. This tutorial needs updating for new gui.

    What if FAT32 is already present should it be removed or shrink ?

  3. thanks for the post. would have saved me lots of time if this were included in live install dialogue.

Leave a Reply to Bobby Cooper Cancel reply