Author Topic: Swap not recognize  (Read 864 times)

Offline skotch

  • Newbie
  • *
  • Posts: 2
Swap not recognize
« on: November 11, 2013, 03:47:33 pm »
Hello,



i'm with the usb live installer but when i'm trying to install it on a hard drive, it doesn't recognize my swap partition whereas it exist. Any ideas ?



Here are screenshots :



1384177481.png



1384177562.png



1384177592.png



Thanks for answers !



[Edit] I'm going to try in console mode, if i know how to use it and I'll come back to say something.
« Last Edit: November 11, 2013, 03:47:33 pm by 64 »

Offline Arthur

  • Newbie
  • *
  • Posts: 1
Re: Swap not recognize
« Reply #1 on: November 12, 2013, 11:08:12 am »
You have linux-swap (swap partition) in GParteg, marked in red (ps too small pictures :) )
« Last Edit: June 30, 2014, 01:39:31 am by 65 »

Offline pavroo

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1465
    • SparkyLinux
Re: Swap not recognize
« Reply #2 on: November 12, 2013, 04:50:38 pm »
Even you have the swap partition prepered already, the present installer has an unfixed bug. On some kind of machines it does not recognize any partitions if you plugged an USB disk in. So what I can suggest is to burn Sparky iso on DVD disk and run it with no USB disk plugged in.
« Last Edit: June 30, 2014, 01:39:10 am by 14 »
Nothing is easy as it looks.

Offline zwen

  • Newbie
  • *
  • Posts: 1
Re: Swap not recognize
« Reply #3 on: December 30, 2013, 06:16:44 pm »
This problem does also exist for the new GameOver (3.2)-Edition (amd64). The swap-partition could be created via GParted but after closing this tool there is only "Exit - Quit the Installer" available. I've tried via USB and DVD but always the same issue. Console-Installation leads also to this bug. The older one (GameOver 2.1) worked pretty well but there was only i686-architecture for newer systems. I need 64-bit, so it's gonna be good, if this bug is fixed in time. I really like your work so I hope I can go one with the new one.
« Last Edit: June 30, 2014, 01:38:48 am by 180 »